The Dynacord PowerMate 600-3 is a mixing console with built-in amplifier. This PowerMate 600-3 is already the third generation of this mixer with built-in amplifier. The mixer actually has six types of audio devices in one compact frame: a mixer, two effects units, graphic equalizer, USB audio interface and power amplifier.
The mixer has 6 low-noise microphone preamps, 3 auxiliary buses (one of which is pre/post fader switchable). These Aux buses allow high flexibility for monitoring. The two effect processors offer 100 presets, including the well-known PowerMate reverb and delay. Each preset is edited and stored in 20 user memories.
The built-in USB audio interface has four playback and four recording channels simultaneously with a PC or Mac at studio standard quality: 24-bit / 96 kHz. An additional MIDI interface allows integration of instruments, such as keyboards. The mixer comes with a license for Steinberg's Cubase software. The 11-band stereo graphic equalizer can be flexibly routed to master or monitor channels.
The amplifier is extremely powerful with as much as 2x 1000 W / 4 Ohms (RMS). Thanks to the modern switching-mode power supply and a Class-D output stage, it is very efficient and lightweight. The slim enclosure protected by a robust plastic cover with integrated handle for easy transport.
Dynacord PowerMate 600-3 mixer features:
- Dynacord Powermate 600 MKIII powered mixer
- class D amplifier
- 2x 1000 W (4 Ohms), 2x 600 W (8 Ohms), 2x 1350 W (2.66 Ohms)
- connections:
- 6 mic jacks (XLR)
- 4 outputs (XLR, 6.3 mm jack, SpeakOn rear panel)
- 6 FX/AUX/Mon (6.3 mm jack)
- 4 RCA jacks
- USB jack
- MIDI in/out (5-pin, rear panel)
- lamp jack (12V DC)
- footswitch (6.3 mm jack)
- headphones (6.3 mm jack)
- power cable (rear panel) - digital audio interface
- 4 in/4 out
- 24 bit AD/DA conversion
- sampling rate: 44.1/48/88.2/96 kHz - low-cut filter on all mono channels (80 Hz)
- graphic stereo equalizer
- +48V phantom power supply
- dual stereo effect processor, with 100 standard presets, 20 adjustable
- tap delay
- 128 x 64 OLED display
Dynacord PowerMate 1000-3 mixer specifications:
- frequency range: 15 Hz - 70 kHz
- THD: <0.005%
- noise: -97 dB
- S/N ratio: 105 dB
- effects: 2x stereo 24/48-bit, 100 factory and 20 user presets, Tap-Delay
- protections: audio limiters, high temperature, short circuit, power-on delay, back EMF, high voltage protection
- Dynacord part no.: DC-PM600-3-UNIV
- Dynacord order no.: F01U213899
- dimensions (WxDxH): 483 x 135.8 x 310.3 mm (7 HU) (without cover), 438.8 x 161.7 x 362.5 mm (with cover)
- weight: 9 kg (without cover), 9.5 kg (with cover)
Included: lid, manual and power cable
